Trace your own mirror from a photo
The fitter comes with 8 common side-mirror shapes and a set of stick-on shapes. If yours isn't among them, you can copy the shape from a photo. It takes about two minutes, and the photo never leaves your browser.
Which one are you tracing?
- Your side mirror. In the fitter, open the mirror menu at the top left and choose "My side mirror isn't here: trace it from a photo".
- A stick-on mirror. Add the shape closest to it first and select it. Then choose "Reshape it from a photo" under the shape styles. Use this for a mirror you already own, or a product picture you found online. Starting from the closest shape is what lets the site suggest the right kind of mirror to buy.
Take a good photo
- Stand straight behind the mirror. A photo taken from the side makes the shape look narrower than it is.
- Get the whole glass in the frame, with a little space around it.
- Avoid glare. Shade the mirror with your body, or wait for a cloudy moment. A bright streak across the glass confuses the automatic tracing.
- For a loose stick-on, lay it on a plain sheet of paper in a different colour from the mirror.
Please don't use photos that show people or licence plates. Your own reflection in the glass is the usual culprit, so hold the phone to one side of your face.
Trace the edge
- Straighten it. If the photo came out sideways or tilted, use Turn and the Straighten slider first. They clear the points, so do this before you start tapping.
- Tap along the edge. Eight or more taps, spread all the way around, give a good outline. Drag a point to move it.
- Or try Auto-detect. Tap once inside the mirror. This works when the mirror is one even colour against a different background, which is common in product pictures.
- Set the corner count. Most side mirrors have 4 or 5 corners. If the yellow line cuts a corner off, add one.
Give it a size
A photo shows the shape but not the size, so the last step asks for the width.
- Side mirror: measure the glass at its widest point. No ruler? A bank card is 3.4 in (86 mm) wide, so count how many card widths fit across.
- Stick-on mirror: use the width from the product listing if you have it. You can leave it empty, and the mirror is drawn at a typical size for its shape.
Good to know
- A traced shape is saved on the device you used. It won't appear on your other devices.
- A traced side mirror replaces the outline of the shape you had picked. To go back, choose "Edit the shape", then "Reset to original".
- The tracer draws shapes without inward notches, so a heart-shaped or crescent mirror comes out filled in.
- The result is a close sketch, not a measurement. Hold the real mirror in place before you stick anything down.